Vandyvape Berserker Mini RTA Unboxing

The Packaging:

The front of the box is colored in grey, white, and blue. There is some Vandy Vape branding on the top from of the box and underneath the Vandy Vape branding, it it says full steam ahead. There is also a label that says Berserker Mini MTL RTA inspired by Alex From Vapers MD. This RTA was developed in collaboration with Alex from Vapers MD which is a very popular Russian YouTube channel.


In the foam insert of the box and you will find a tank with a metal tank section pre installed. On the right side of the foam insert there are two glass sections. One has a yellowish tint to it and it is made of Ultem, the other is clear. The Berserker Mini comes with a black MTL drip tip pre installed but on the right of the foam insert you will also find a Ultem MTL drip tip. This RTA is available in SS, black, gold, and rainbow.

What’s In The Box:


Fully Assembled Berserker Mini RTA with Delrin Drip Tip And Metal Tube

2 Spare Tank Sections (1 Clear & 1 Ultem)

1 Spare Ultem Drip Tip

2 Clapton Coils

1 Blue Screwdriver

Spare O’rings

Spare Deck Screws

Spare 510 Pin

Drip Tip Options:

The Berserker Mini comes pre installed with a 510 MTL black Delrin drip tip. It also comes with the same exact drip tip made out of Ultem. Both drip tips are secured to the top cap with two o’rings. Both drip tips are extremely conducive to MTL vaping and should provide you with all day comfort.


Top Cap:

The top cap has some Vandy Vape branding on the top exterior. It is a 510 compatible top cap and it has some knurling on the exterior edges. On the interior of the top cap there is some threading that allows you to thread it onto the fill port cap. There is also an o’ring around the interior of the top cap to help seal everything up.

Fill Port Cap:

The fill port cap has two Tic Tac shaped ports that accommodate most any type of juice bottle on the market today. There is a threaded protrusion with an O ring around it that allows you to secure the top cap to the fill port cap. The chimney on the fill port cap is very short and narrow, which is conducive to great flavor.

The Barrel:

The barrel section on the Berserker is also made out of stainless steel and it has a very conical shape to it for superior flavor. It is attached to the top fill cap port and it does not separate. The interior of the barrel has an extremely conical shape to it that condenses into a very narrow chimney. Threading on the barrel is extremely smooth and it attaches to the bottom part of the deck.

The Tank Sections:

The Berserker Mini comes with 3 different tank sections in one box. It comes pre installed with a metal tank section. The metal section is made out of stainless steel and it has a Berserker emblem on it. There are also two other spare tank sections included in the box of the Berserker. One is made of Ultem to match the Ultem drip tip in the box. The other is a clear glass section. All tank sections included in this packaging are TPD compliant.


The Deck:

This is the same exact type of deck that you will find on the full size Berserker. The only difference being is this deck is a little smaller because the circumference is 22 mm as opposed to 24 mm on the full size Berserker. The Mini has a two post one terminal per post design. Your leads can be mounted on either side of the post terminals. Airflow is taken from directly underneath your coil. This deck features Phillips head screws with large wicking ports. Your wicking material gets fed its liquid from underneath the deck. Also included in your package are spare o’rings for the deck as well as spare deck screws.

The Base:

The base of the Berserker Mini measures 22 mm. On the exterior of the base where the AFC is, there is some light knurling. There is also one air flow slot that is fully adjustable. The action on the AFC is very smooth and it has stoppers on both ends. There are five AFC adjustments that taper down as they go along. The five air hole measurements are .1mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm. The single air slot on the Berserker Mini has a teardrop like shape to it. Turn the base over and on the bottom of it you will see some Vandy Vape branding as well as a serial number.


The 510 Connection:

The 510 connection on the Berserker Mini is gold plated and  fully removable. It has a flathead slot to it and and an insulator ring around it. Threading around the 510 pin is stainless steel and very smooth. There is also a spare 510 pin included in your package.



Stainless steel construction;

Diameter: 22mm

Capacity: 2ml (full TPD complaint);

510 threading connection

Designed for mouth-to-lung (MTL) vaping;

Simply possibility of a real cigarette tightening;

Bottom airflow, huge air channels

Different adjustable air hole sizes, 0.1mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm

Easy-to-build dual post deck, supporting single coil

Convenient top fill design

Ultem drip tip and extra Delrin drip tip included;

Drip tip type: 510, Detachable structure, easy to clean and maintain

Gold plated 510 pin